Products Help & FAQ Freebies Contact/About
 
 Blowout Sale - Less than half price and below my cost
all you have to do is a little more work
Replacement Roll Hoop Speakers
for years 2006 to 2009 only

   

 Extra work you will have to do:
(not documented in instructions)

Cut 2 mounting "ears" off of each speaker, on opposite
         corners (it's plastic, cuts easy with a hack saw blade)
         Speaker has 4 ears, you only need 2, the other 2 get in
         the way and must be removed

Provide your own wires and connectors to OEM wiring

Provide your own crimp terminals to connect wires to
        speakers  OR solder the wires to the speaker tabs

Frequency response comparison and audio clips
     
    See installation information here - Web instructions only, no printed instructions are in the kit
    $35  $75 per pair (two speakers, does one roll hoop)   

Kit contents: 
One pair of new speakers, not modified to fit inside roll hoops (see "Extra Work" note above)
 No Wires* are pre-attached to speakers and do not have in-line bass blockers and wire nuts
One pair of speaker mounting brackets with mounting hardware (uses old speaker screws to mount to car)
 No Special tool for easy removal of speaker grills

 * Some of the "first to sell" blowout speakers may be furnished with wires and bass-blockers but they will not be attached to the speakers.  Also, some may be shipped with the "special tool" for removing the OEM grills.  But once I run out of parts subsequent orders will have only the speakers and mounting brackets.

Tools you will need:
 Hack saw or fine-tooth saw to cut off 2 mounting ears
 Pliers and Philips screwdriver
Wire cutters/stripper and connectors to splice to OEM wires and to speaker terminals
Magnets & duct tape to keep from losing metal clips when you remove grills
Razor knife, hole saw, and/or file to cut holes in plastic grills

Some customers have asked for more information on these speakers.  Here it is: