Modifry's S2000 ECT Purchase

ECT Help ECT Home AP1 Details AP2 Details Install Info

Notice for non-stock users: This is NOT a "Plug-n-Play" device.

Any application other than a stock S2000 may require some electrical knowledge and the ability to measure actual engine temperature to get this product working correctly. Just like an after-market ECM requires "tuning", this module will need to be re-programmed to work with vehicles other than the S2000 or in some cases, to work with S2000's with significant wiring modifications. Please do some preliminary testing as described here to be sure your vehicle is suitable for use with this product.

Programming Assistance - I will work with any customer that does his homework and can make the necessary measurements to determine the correct programming settings. If you are unable to program the module because of computer or serial port problems you may ship the module to me and I'll program it for free. If you do your measurements before you purchase I can program your custom settings before the ECT module is shipped to you. Again, there is no charge for this service.

If you are not capable of using a meter to verify the correct ECT sensor voltages are present, or don't have the ability to measure the actual coolant temperature DO NOT BUY THIS PRODUCT FOR APPLICATIONS OTHER THAN A STOCK S2000.

If you're buying this for a stock S2000 it should work fine as-is,
with no need for voltage measurements or custom programming.

ECT Module Qty: $70.00		Only works on years 2000-2005

Spare ECT Programming cable $7.50 - for those that lost theirs

The modules themselves are the same for AEM and stock applications, but NOT for AP1 versus AP2. The end-user can convert a stock AP1 ECT for use on an AP1 AEM EMS, but you can't convert an AP1 to an AP2.

What you get for your money:

	The ECT Display Driver module with wiring harness
	Separate programming cable for use with a standard DB9 PC serial port
	T-taps and connectors for typical installations

Make sure you download the appropriate file for your applications: AP1 Files AP2 Files

Each zip file contains:

	Complete installation, operation, and programming instructions in pdf format
	Pre-configured HyperTerminal session file for use with Windows (most users will be able to copy this file to their computer, 'double click it', and be ready to connect to the module and download)
	Sample programming text files, one for AEM EMS applications and one for use with the stock ECM. Files are easily edited to customize the range of the temperature display.

Copyright 2005 by Modifry Products, LLC all rights reserved.
Modifry and the "squiggly arrows" design are trademarks of Modifry Products, LLC.
AEM and AEM EMS are trademarks of AEM Performance Electronics.
Neither Modifry Products, LLC nor Modifry.com are sponsored, endorsed, affiliated or authorized by AEM.