backWorks on all 2006, 2007, & 2008
Alpine head units.
Not recommended for DVA-9965 or similar head
units that have speaker connections in a separate wire harness as you'll still
have to splice speaker wires.
Check your Alpine HU or manual - if all the wires are on one connector (like
below) then it should work fine.
Works on UK cars and head units - thanks
to Tom for being the guinea pig and reporting the good news!
|
Now doesn't this look easy? Get the PnP harness for $25 and don't splice wires! This custom-made wiring harness allows you to install your
Alpine head unit and DCI with a minimum of effort, in many cases completely eliminating
the need to splice wires. All you do is plug the connectors together and the
wiring for power, ground, front and rear speakers, dash controls, power
antenna, dimmer, and the
mute/ATT function are done. The only time you would have to do
additional wiring is if you elect to use options such as a cell phone interface,
external amplifiers, or the SCV feature of the
DCI (which is just one wire). |
||
 |
SCV
Wiring Kit ($3) makes short work of connecting to the vehicle speed signal. No crimp tool reqd.  |
|
|
Your Alpine head unit wire harness connector must look like this |
||
|
|
||
