10 oz Black Tumbler + Lid
$15.00 $10.00
10 oz Stainless Tumbler + Lid
$15.00 $10.00
20 oz Stainless Steel Cup
$20.00 $15.00
Contigo Auto Seal Mug
$25.00 $12.00
Contigo Snap Seal Mugs
$20.00 $10.00
Cork Coasters
$10.00 $3.00
Emergency Flashlight
$22.00 $12.00
Honda - S2000 Coffee Mug
$10.00 $8.00
Keychain Flashlight
$7.00 $3.00
Leatherette Coaster Sets
$18.00 $9.00
Leatherette Coasters
$10.00 $5.00
Leatherette Key Rings
$5.00 $2.50
Leatherette Money Clip
$10.00 $5.00
Radio Bracket Combo
$49.00 $40.95
S2000 Adjustable-Fit Cap
$22.00 $15.00
S2000 Stretch-Fit Cap
$22.00 $15.00
Start Button Tee Shirt
$25.00 $15.00

Plastic Speaker Rings Up to 5.3" Cut-out

Plastic Speaker Rings Up to 5.3" Cut-out
Vehicle Usage: S2000
Availability: Out Of Stock
Add to Wish List

Modifry Product's custom-designed speaker spacer rings allow easy installation of 6 or 6.5 inch speakers that have a cut-out measurement between 5.0 and 5.3 inches.   These are CNC-machined in our shop from high-density urethane, which has many benefits over wood-based products.  In addition to a 66% weight savings vs MDF, this material is dimensionally stable, dampens vibrations better, and is impervious to water.  And because it's not as hard as MDF you can mount your speakers without the need to pre-drill pilot holes when using the self-starting deep-thread screws that we supply.  If you need more than 4 screws for each speaker we suggest you purchase an extra pack of 8 screws from us, as not all "wood screws" will hold well in this material.

  • Price includes a PAIR of spacer rings, mounting screws for the spacer rings, plus screws to mount your speakers
  • Fit most 6" speakers and many 6.5" universal speakers with a cut-out dimension between 5" (127mm) and 5.2" (132mm)
  • 3/4" thickness accomodates speakers up to 3 1/8" deep from front mounting flange (measured on my car)
  • "Pocket" holes on the back side allow for a flush fit between the ring and door panel, normal "flat" speaker rings leave a gap and don't seal well
  • Special cuts on top and bottom edge for door panel clearance
  • Radius cut on inside circle allows drivers with a curved flange edge to fit flush

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating:  Awful           Awesome

Enter the code in the box below: