ECT-2 for S2000

ECT-2 for S2000
ECT-2 for S2000 ECT-2 for S2000 ECT-2 for S2000
Vehicle Usage: S2000
Availability: In Stock

Available Options

* ECT Version:

$60.00
Qty:  
Add to Wish List

This module is a replacement for our "original ECT module" and comes pre-programmed to work with either the stock ECM or AEM EMS.  In either case, this module provides an accurate and more meaningful temperature display where each segment of the gauge corresponds to a known coolant temperature.  Includes full-color installation instructions. Note - the AP2 version only works on model years 2004 and 2005, it will not work on 2006 and newer.  If your cluster has an outside temperature display this product will not work.

  • Costs less than original ECT module
  • Operates from 12V DC (compared to 5 volts for original module).  Easier to find 12 volts!
  • Only 4 wires needed for a typical installation - Ground, +12v, ECT sensor input, and output signal to S2000 cluster
  • Screw Terminals instead of proprietary connector makes wiring easier
  • Improved test mode - lights the cluster temperature display "half-way" to test the ECT module, your cluster, and the wiring between the two.
  • LED indicator is significantly brighter and easier to see - flashes when unit is operating normally, flash rate is proportional to temperature (faster flashing = higher temp and higher gauge reading)
  • Can be re-programmed using a Windows PC with serial port or USB to serial adapter.  Email us if you need help programming.

In order to keep the cost down we do not include wires or a programming cable with this product but you can make your own programming cable following the instructions in the Manuals tab or if you prefer a pre-made cable look in the "Related Products" tab.  If you don't have access to a PC with serial port we can usually do re-programming for you if you're willing to ship the module back to us and provide the necessary information.

Note - the AP2 version only works on model years 2004 and 2005, it will not work on 2006 and newer.  If your cluster has an outside temperature display it is 2006 or newer and this product will not work.

ECT-2 Module for S2000

Installation Instructions

ECT-2 Programming zip file  This zip file has instructions for using Hyperterminal and sample programming files

ECT Sensor Tests - Do this if you want us to do custom programming for best operation with your car (no extra charge)

Make your own programming cable

Troubleshooting Programming Problems

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating:  Awful           Awesome

Enter the code in the box below: