Wired DCI for Alpine, Kenwood, JVC, Clarion

Wired DCI for Alpine, Kenwood, JVC, Clarion
Vehicle Usage: S2000
Availability: In Stock

Available Options

* Head Unit brand:

$90.00
Qty:  
Add to Wish List

Allows you to use the factory dash controls to operate Alpine, Kenwood, JVC, or Clarion head units that are equipped with an input for a "steering wheel adapter".  The DCI provides all the functions of the original Honda controls plus additional functions and features not available with the stock setup or any other "steering wheel adapter".  Because after-market head units don't all use the same command sets there are some slight differences in how they operate with the DCI, so you may want to review the DCI instructions in the "Manuals & Help" tab.

Check out the Related Products tab to see Adapter Harnesses for the S2000 and Plug-n-Play harnesses for Alpine and Kenwood.

Help finding compatible head units

Features of the Wired DCI

  • Small adapter unit - about 1.5" x 2"
  • Provides 9 control functions using the 5 stock dash switches.  See function charts on head Unit links above.
  • No complicated programming required - just set your head unit brand on the dip switches and it's ready to operate.
  • Auto-repeat function built-in - press and hold VOLUME UP, and the volume will increase rapidly as the command is repeated.  Auto-repeat works on other functions too,  meaning features like 'track fast-forward' will work if you press and hold the NEXT TRACK button combo, just like they do with the factory remote control.
  • Optional Speed Controlled Volume function (SCV) - An exclusive Modifry Products feature enabled by connecting one additional wire to the S2000's speedometer circuit.  The DCI will then automatically raise and lower the volume based on vehicle speed. No more fiddling with the volume control when background and wind noise increases as you speed up.  Details here
  • Mute Function Included - unlike other steering wheel adapters, the DCI works perfectly with the S2000 Mute button.  In fact, for head units that have a dedicated "ATT" wire the DCI can be set to pause playback of CDs and MP3 files and completely mute the audio.

Kenwood users - On some head unit models (X-998 for example) Kenwood changed the operation of the "ATT wire" so that it can only be used with a Kenwood navigation system. This prevents the DCI from controlling the ATT wire and pausing playback when you hit the Mute button. Only the head unit's standard mute command will operate, which lowers the volume but continues to play.  Make sure DCI option switch 1 is set to ON to enable the standard mute command.

Wired DCI for Alpine, Kenwood, JVC, Clarion

Installation Instructions

FAQ - Hover your mouse over a question to see the answer.

Will the DCI operate my after-market head unit exactly like the factory dash controls?
What after-market head units are supported by the DCI?
How do I know which DCI to buy?
What if I want a DCI for a different head unit?
What iPod/iPhone commands are supported by the DCI?
Will the DCI work on vehicles other than the S2000?
What is the "Modifry Adapter Harness" and do I need it?
Do I need to use Modifry's Adapter Harness or can I use another brand?
Do I need a factory remote to use the DCI?
Can I program the dash buttons for different functions?
What is the warranty on the DCI?

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating:  Awful           Awesome

Enter the code in the box below: